Inventum VVW6046AB Dishwasher
(Figure 14)
(Figure 15)
1. Remove the rinse reservoir cap (A) by lifting up the handle.
2. Pour the rinse aid into the dispenser (B), being careful not to overfill.
Caution:
Remove any spilled rinse aid immediately. Spilled rinse aid can form extreme
foam which can cause leaks.
3. Close the cap.
SETTING THE LEVEL OF RINSE AID CONSUMPTION
When water stains form on your dishes after a wash cycle, you have to increase the level of rinse aid consumption.
When blue stains form on your dishes after a wash cycle, you have to decrease the level of rinse aid consumption.
1. Open the door and switch on the appliance.
2. Within 60 seconds after the appliance was switched on, press the program button for 5 seconds. Press the Delay
button to enter the set model. The rinse aid indicator blinks at 1Hz frequency.
3. Press the Program button again to select the proper set according to your using habits. The setting will change in
the following sequence: D1->D2->D3->D4->D5->D1. The higher the number, the more rinse aid the dishwasher
uses.
4. Wait for 5 seconds or press the Power button to complete the setup and exit the setting mode.
5. Close the cap.
LOADING THE APPLIANCE
Correctly placing dishes into the appliance has a positive effect on the energy consumption and the washing and
drying performance of your appliance.
You can place dishes in the cutlery drawer or the cutlery basket, the upper basket and the lower basket.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the upper and lower
spray arm. If the spray arms are blocked they cannot spin during washing.
Loading the cutlery drawer
The cutlery drawer is designed for loading cutlery. You can remove the cutlery drawer partly to create more space in
the upper basket or you can remove it completely for easy loading.
(Figure 16)
1. If necessary, remove the cutlery drawer partly from the appliance.
2. If necessary, remove the cutlery drawer from the appliance.
(Figure 17)
3. Place the cutlery items in the drawer.
Loading the cutlery basket
The cutlery basket is designed for loading cutlery.
Warning:
Place sharp items of cutlery, such as knives and forks, face down in the cutlery basket to prevent injury.
Caution:
Make sure that there are no items of cutlery sticking out of the bottom of the basket.
(Figure 18)
1. Place the cutlery piece by piece in a compartment of the cutlery basket to make sure that the
spray arms can reach all items.
English • 43
| General | Details |
|---|---|
| Name | Inventum VVW6046AB Dishwasher |
| Make | INVENTUM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.44 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INVENTUM VVW6040AB Building Depot Dishwasher
INVENTUM VVW6060AB Dishwasher
INVENTUM VVW6030AS dishwasher
INVENTUM VVW6008AW Dishwasher
Inventum IVW6021A Dishwasher
INVENTUM VVW4530AW Dishwasher
INVENTUM VVW6046AW Dishwasher
INVENTUM IVW6008AXL Dishwasher
INVENTUM VVW6035AW Dishwasher
INVENTUM IVW6015A Dishwasher
BOSCH SHE3AR76UC Ascenta 24 Front Dishwasher
FISHER PAYKEL DD60ST4HZB9 Single DishDrawer Dishwasher
BOSCH SMV8ZCX00X Dishwasher
GAGGENAU DF211701 200 Series 24 Dishwasher
BOSCH 300 Series 24 Front Dishwasher
BOSCH SMI6ZDS49E-39 Dishwasher
FISHER PAYKEL DD24DTX6I1 Integrated Double Dishwasher
Haier HDW13F0B1 Hygiene Dishwasher
Home Connect SMS4HVW00E Dishwasher
FISHER AND PAYKEL ADDD24DTNX Tall 24 Dishwasher