LG LRFLC2706S Dishwasher
INSTALLATION 13
Routing Water Supply Line and
Preparing Water and
Electrical Connections
Electrical Wiring
There are 2 channels in the bottom of the
dishwasher for routing the water and electrical
connections.
WARNING
• Water Connection
• As shown in the bottom view below, channel a
is for the water supply line, and channel b is for
the electrical cable.
- Do not reuse an old hose. Use only a new hose
when installing the dishwasher. The old hose
could leak or burst causing flooding and
property damage. Contact an LG Customer
Information Center for assistance in buying a
new hose.
• Electrical Connection
- Use a time-delay fuse or circuit breaker.
- Operate this appliance with the correct voltage
as shown in this manual and on the rating
plate.
- The wiring must be grounded properly. If in
doubt, have it checked by a qualified
electrician.
1
2
Turn off the house water supply and the
circuit breaker or dedicated power before
connecting the dishwasher.
- Connect the appliance using 3-wires, including
a ground wire.
- The appliance and outlet must be positioned
so that the plug is easily accessible.
Run the water supply line along the floor 6 1/
2" – 7 3/4" (165 mm – 197 mm) from the left
side of the opening and tape it in place in
front of the opening.
- Do not use an extension cable or adapter with
this dishwasher.
- Do not overload the outlet with more than one
appliance.
- The included 16AWG wire nuts should be used.
3
Run the electrical cable c along the floor 14"
– 16" (356 mm – 406 mm) from the water
supply line d and tape it in place.
- It is the personal responsibility and obligation
of the product owner to have a proper outlet
installed by a qualified electrician.
• The electrical outlet must be within 4 ft.
(1.22 m) of either side of the dishwasher.
• The best location for the electrical conduit is
on the right side of the back wall. Re-route
the electrical cable before installation if the
electrical conduit pipe is longer than 3" (76
mm) and is centered on the back wall.
CAUTION
• When connecting the dishwasher water supply
line to the house water supply, sealing tape or
compound should be used on pipe threads to
avoid leaks. Tape or compound should not be
used on compression fittings.
• Connect the dishwasher to a hot water supply
with a temperature range between 120 °F (49 ℃)
and 149 °F (65 ℃). This temperature range
provides the best washing results and shortest
cycle time. To prevent damage to dishes, the
temperature should not exceed 149 °F (65 ℃).
• Water supply pressure must be between 20 psi
and 80 psi (140–550 kPa). If the water supply
pressure exceeds 80 psi, a pressure reducing
valve must be installed. Otherwise premature
failure of the inlet valve may occur.
| General | Details |
|---|---|
| Name | LG LRFLC2706S Dishwasher |
| Make | LG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.74 MB |
(1 votes, average: 5.00 out of 5)
Loading...
LG LDTH7972SS Black Dishwasher
LG SDWB24S3 STUDIO Smart Dishwasher
LG LDTH7972D Smart Tub Dishwasher
LG LDPH7972D Smart Dishwasher
LG XD3A25UMB 15 Place QuadWash Dishwasher
LG LDT779 Dishwasher
LG LDT7808BD Dishwasher
LG LDFN4542S Dishwasher
LG DFB424 Dishwasher
LG LDTS5552D PrintProof Black Dishwasher
Whirlpool WDF560SAF Undercounter Dishwasher
FISHER AND PAYKEL DW24UT4I2 Tall Dishwasher
BEKO BDFB1630W Dishwasher
KitchenAid KDTM404KPS Dishwasher
Midea MDF18A1AWW Dishwasher
KitchenAid W11373417 Dishwasher
beko DFN05R10W Dishwasher
SIEMENS SN55ZS02BD Dishwasher
LG LDTH7972D Smart Dishwasher
IKEA RENODLAD Integrated Dishwasher