SHARP QW-NA1BF47EI-EU Series Dishwasher
2.4. Electrical connection
WARNING: After removing the top panel
of your dishwasher, the machine should be
placed in a space of the dimensions shown in
the figure below.
WARNING: Your machine is set to
operate at 220-240 V. If the mains voltage
supply to your machine is 110 V, connect a
transformer of 110/220 V and 3000 W
between the electrical connection.
Connect the product to a
grounded outlet protected by a fuse
complying with the values in the
"Technical Specifications" table".
The earthed plug of the
machine must be connected
to an earthed outlet supplied by
suitable voltage and current.
H1: min A
H2: min B1
H3: min B2
In the absence of earthing
installation, an authorised
electrician should carry out an
earthing installation. In the case of use
without earthing installed, we will not be
responsible for any loss of use that may
occur.
The plug on this appliance may
incorporate 13A fuse depending on
the target country. (For Example UK,
Saudi Arabia)
A
B
All
B1
B2
Products
Product’s Height
(±2 mm)
820 mm
830 mm
835 mm
2.5. Fitting the machine undercounter
If you wish to fit your machine undercounter,
there must be sufficient space to do so and
the wiring-plumbing must be suitable to do
so (1). If the space under the countertop is
suitable for fitting your machine, remove the
worktop as shown in the illustration (2).
A: If there is no felt on the top of the
product; you should take into account this
product’s height.
B1: If there is felt on the top of the product
WARNING: The countertop, of which
the machine will be placed under, must be
stable in order to prevent imbalance.
with 2nd basket; you should take into
account this product’s height.
The top panel of the dishwasher must
be removed to fit the machine under the
countertop.
B2: If there is felt on the top of the product
with 3rd basket; you should take into
To remove the top panel, remove the
screws that hold it on, located at the rear
of the machine. Then, push the panel 1 cm
from the front towards the rear and lift it.
Adjust the machine feet according to the
slope of the floor (3).
account this product’s height.
Fit your machine by pushing it under the
counter taking care not to crush or bend the
hoses (4).
EN - 7
| General | Details |
|---|---|
| Name | SHARP QW-NA1BF47EI-EU Series Dishwasher |
| Make | Sharp |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.94 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SHARP SDW6506JS 24 Front Dishwasher
SHARP SDW6888JS Smart Dishwasher
SHARP QW-NA24S42DI-EE Dishwasher
SHARP SDW6767HS Dishwasher
SHARP SDW6767HS Slide In Smart Dishwasher
SHARP SDW6767HS Smart Dishwasher
SHARP QW-NA26F39DI-EN Dishwasher
SHARP QW-NS1CF49EI-ES Dishwasher
SHARP SDW6757ES Dishwasher
SHARP QW-NA25GU44BS-DE Undercounter Dishwasher
Whirlpool W2F HD624 Dishwasher
DeLonghi 555 1240 mm Dishwasher
BOSCH SMI4HBS19E Dishwasher
BOSCH SMI6ZDS49E-39 Dishwasher
BOSCH SHP78CP5N 800 Series Dishwasher
BOSCH SMD8YCX01G Fully- Dishwasher
FISHER and PAYKEL DD60SDFTX9 Contemporary Tall Dishwasher
DAEWOO DA1E6FW0ES Dishwasher
Hotpoint H7F HP43 X UK 15 Place Setting Dishwasher
FISHER PAYKEL DD60SCX9 Dishwasher