Home > Thermador > Thermador DWHD640EFM Dishwasher

Thermador DWHD640EFM Dishwasher

en-usꢀBefore you begin  
¡ Be sure that your water heater set at 120° F (49° C)  
and the water pressure measures at 15-145 psi (1-10  
bar)  
Level  
¡ Determine the mounting method based on the  
dishwasher model and counter-top type. See  
¡ Only use the included hardware for the installation. If  
you are replacing a dishwasher, dispose of old hose  
and other equipment properly.  
Coarse sandpaper  
¡ To avoid scratching the floor, have floor protection  
ready for when the dishwasher will be slid into the  
cabinet.  
2.5ꢀElectrical Requirements  
Ensure that the following electrical requirements are met.  
Parts  
Dishwasher electrical rating  
Elbow connection with 3/4"  
female hose threads on one end  
fits your water supply line on the  
other.  
Volts  
120  
Hertz  
60  
Amperes  
Watts  
12  
Water inlet hose - minimum 3/8"  
outer diameter copper tubing or  
metal braided dishwasher supply  
line.  
1,440 (max)  
Electrical Supply  
* Both the elbow and the water  
inlet hose can be found in the  
dishwasher supply kit  
The customer has the responsibility of ensuring that the  
dishwasher electrical installation is in compliance with all  
national and local electrical codes and ordinances. The  
dishwasher is designed for an electrical supply of 120V,  
60 Hz, AC, connected to a dishwasher-dedicated, properly  
grounded electrical circuit with a fuse or breaker rated 15  
or 20 amps.  
SMZSH1ABUC.  
Shut-off valve and fittings  
appropriate for hot water supply  
line.  
2.6ꢀCabinet Requirements  
2.4ꢀPre-install Checklist  
Ensure that the cabinet space for the installation meets  
the required dimensions.  
Ensure that the following requirements are met when  
planning the installation of your appliance.  
WARNING  
Avoid Scalding or Electric Shock Hazard  
Make sure the water supply and electrical supply are  
shut off before installation or service.  
Do not allow the electrical and supply lines to touch.  
¡ Select a location as close to the sink as possible for  
easy access to water supply and drain lines.  
¡ Be sure the unit is installed close enough to the sink so  
the drain hose length does not exceed 92" (2337 mm)  
and so that a portion of the drain hose is raised at least  
33" above the floor level.  
¡ Check that the opening in the cabinet is large enough  
for routing the electric cable, water line, and drain hose,  
and if not, create a new opening. See  
¡ If the opening is wood, be sure it is sanded smooth. If it  
is metal, be sure it is covered by a protective gasket.  
6
     
GeneralDetails
NameThermador DWHD640EFM Dishwasher
MakeThermador
LanguageEnglish
FiletypePDF (Download)
File size4.05 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Thermador DWHD660EFP Sapphire Dishwasher
Thermador DWHD660EFP Sapphire Dishwasher
Thermador DWHD660EFM Dishwasher
Thermador DWHD660EFM Dishwasher
Thermador DWHD640EFP Dishwasher
Thermador DWHD640EFP Dishwasher
Thermador Dishwasher : for DWHD650W and More
Thermador Dishwasher : for DWHD650W and More

Thermador DWHD640EFM Dishwasher