Home > CMA Dishmachines > CMA DISHMACHINES CMA-180VL Dishwasher

CMA DISHMACHINES CMA-180VL Dishwasher

8. A 7/8” detergent fitting hole is provided in the wash tank behind the machine.  
9. Check the machine operating temperatures. Adjust if necessary.  
a. After the machine has warmed up for five to ten minutes (5 – 10 min.), observe  
the wash and rinse temperatures. The wash temperature must be 155°F  
minimum. The rinse temperature must be 180°F minimum. If necessary, adjust  
the temperatures by removing the panel in front of the respective heater and  
turning the adjustment stem clockwise to increase.  
NOTE: Rinse water temperature must be observed during the rinse cycle.  
10. Check all water and drain fittings for leaks.  
11. Install the wall chart and instruct the machine operator on the proper cleaning and  
operation of the CMA-180VL.  
The flush-down or cleaning of the condenser is done when the main power switch is turned to the  
off position.  
Caution: Booster Heater  
Booster heater is shipped on the dishmachine empty to prevent freezing. When the  
machine is powered up for the first time, the booster heater must be filled immediately to  
prevent damage to the heating element. See Section 2.2.7 (4c.)  
To prevent booster heater element damage, CMA has removed a wire from the high limit  
switch. When initially filling of a newly installed dishmachine, you must fill the booster  
tank prior to connecting the removed wire. When water is observed entering the wash tank  
this indicates the booster tank is full and removed wire can be connected. Failure to follow  
these important instructions will destroy the heating element because of dry -firing.  
Warning:  
The Door Safety Interlock (DSI) is used to prevent the wash cabinet doors from being  
opened while the dishwasher is in operation. The interlock prevention arm is extended  
when the wash cycle begins, and remains extended during the duration of the full 61-  
second wash/rinse cycle including the 41-Second steam evacuation cycle. Once the full  
cycle is finished, the door safety interlock arm will be retracted thus allowing the doors to  
wash cabinet to be opened.  
MODEL CMA-180VL INSTALLATION & OPERATION Rev. 2.01C  
Page  
12  
GeneralDetails
NameCMA DISHMACHINES CMA-180VL Dishwasher
MakeCMA Dishmachines
LanguageEnglish
FiletypePDF (Download)
File size0.74 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
CMA DISHMACHINES EST-44 Conveyor Dishwasher
CMA DISHMACHINES EST-44 Conveyor Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
CMA DISHMACHINES UC65e M3 Dishwasher
CMA DISHMACHINES UC65e M3 Dishwasher
CMA DISHMACHINES UC50e Dishwasher
CMA DISHMACHINES UC50e Dishwasher
CMA DISHMACHINES CMA-180 Dishwasher
CMA DISHMACHINES CMA-180 Dishwasher
CMA DISHMACHINES CMA-180UC Dishwasher
CMA DISHMACHINES CMA-180UC Dishwasher
CMA DISHMACHINES H-1X Undercounter Dishwasher
CMA DISHMACHINES H-1X Undercounter Dishwasher
CMA DISHMACHINES 180UC-3 Under Counter Dishwasher
CMA DISHMACHINES 180UC-3 Under Counter Dishwasher
CMA DISHMACHINES AH Straight Thru Design Dishwasher
CMA DISHMACHINES AH Straight Thru Design Dishwasher

CMA DISHMACHINES CMA-180VL Dishwasher