Home > CMA Dishmachines > CMA DISHMACHINES CMA-180VL Dishwasher
CMA DISHMACHINES CMA-180VL Dishwasher
This machine must be operated with an automatic detergent feeder and, if applicable, an
automatic chemical sanitizer feeder, including a visual means to verify that detergents and
sanitizers are delivered or a visual or audible alarm to signal if detergents and sanitizers are not
available for delivery to the respective washing and sanitizing systems. Please see instructions
for electrical and plumbing connections located in this manual and in the feeder equipment
manual.
1.
Check valves should be installed directly at the mixing chamber coupling
located by the vacuum breaker on the back of machine. There are two
1/8” FPT mounting holes provided on the mixing chamber coupling,
which will position the check valves parallel to the machine avoiding any
chemicals from dripping onto the stainless steel should a leak develop.
One hole is for rinse chemical and one for sanitizer chemical, but only
one is needed with the High Temp machines — for rinse chemical only.
2.
3.
Remove the plugs from the mixing chamber; and install injection fittings
(supplied with your dispenser).
A 7/8” detergent injection hole is provided in the back of the wash tank.
Remove the S.S. plug and install the detergent fitting (supplied with your
dispenser).
4.
A 7/8” chemical probe hole is provided in the front of the wash tank
heater just below hi limit switch. Insert the probe into the hole from inside
the wash tank and secure it with the probe retaining nut provided.
Note: Use only commercial-grade detergents and rinse aids recommended by your
chemical professional. Do not use detergents and rinse aids formulated for residential
dishwashers.
Low Temperatures chemical-sanitizing dishmachines must not exceed 6% sodium
hypochlorite solution (bleach) as the sanitizing agent. Higher levels may damage
stainless or components.
Follow the directions precisely that are on the litmus paper vial and test the water on the
surface of the bottom of the glasses
* Electrical and plumbing connections must be made by qualified person who comply with all
available Federal, State, and Local Health, Electrical, Plumbing and Safety codes
MODEL CMA-180VL INSTALLATION & OPERATION Rev. 2.01C
Page
8
| General | Details |
|---|---|
| Name | CMA DISHMACHINES CMA-180VL Dishwasher |
| Make | CMA Dishmachines |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.74 MB |
(1 votes, average: 5.00 out of 5)
Loading...
CMA DISHMACHINES EST-44 Conveyor Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
CMA DISHMACHINES UC65e M3 Dishwasher
CMA DISHMACHINES UC50e Dishwasher
CMA DISHMACHINES CMA-180 Dishwasher
CMA DISHMACHINES CMA-180UC Dishwasher
CMA DISHMACHINES H-1X Undercounter Dishwasher
CMA DISHMACHINES 180UC-3 Under Counter Dishwasher
CMA DISHMACHINES AH Straight Thru Design Dishwasher
AEG FFB73727PM Dishwasher
BOSCH SMS6ITW00I 13 Place Settings Free-standing Dishwasher
FISHER PAYKEL DW60FC4W1 Worktop Dishwasher
BOSCH SMV50M00EU Fully Integrated Dishwasher
JENNAIR JDTS3924SP Dishwasher
BOSCH SMV2HTX02G Dishwasher
BOSCH SMS8ZDW86M Dishwasher
Not mentioned WFE 2B19 X UK Dishwasher
BOSCH SPV4EMX25E Dishwasher
FISHER and PAYKEL DD60ST4ZB9 Dishwasher