Inventum IVW6021A Dishwasher
FILLING THE RINSE AID RESERVOIR
Rinse aid is used to prevent traces of water droplets on clean dishes and increases drying performance.
Caution:
Only use rinse aid that is suitable for dishwashers.
Note:
Fill the rinse aid reservoir when the rinse aid indicator on the control panel is on.
(Figure 9)
1. Remove the rinse reservoir cap (A) by lifting up the handle.
(Figure 10)
2. Pour the rinse aid into the dispenser (B), being careful not to overfill.
Caution:
Remove any spilled rinse aid immediately. Spilled rinse aid can form extreme
foam which can cause leaks.
3. Close the cap.
SETTING THE LEVEL OF RINSE AID CONSUMPTION
When water stains form on your dishes after a wash cycle, you have to increase the level of rinse aid consumption.
When blue stains form on your dishes after a wash cycle, you have to decrease the level of rinse aid consumption.
1. Open the door and switch on the appliance.
2. Within 60 seconds after the appliance was switched on, press the program button for 5 seconds. Press the Delay
button to enter the set model. The rinse aid indicator blinks at 1Hz frequency.
3. Press the Program button again to select the proper set according to your using habits. The setting will change in
the following sequence: D1->D2->D3->D4->D5->D1. The higher the number, the more rinse aid the dishwasher
uses.
4. Wait for 5 seconds or press the Power button to complete the setup and exit the setting mode.
When set to a low number, the appliance uses less rinse aid. When set to a high number, the appliance uses
more rinse aid.
5. Close the cap.
LOADING THE APPLIANCE
Correctly placing dishes into the appliance has a positive effect on the energy consumption and the washing and
drying performance of your appliance.
You can place dishes in the cutlery drawer or the cutlery basket, the upper basket and the lower basket.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the upper and lower
spray arm. If the spray arms are blocked they cannot spin during washing.
Loading the cutlery drawer
The cutlery drawer is designed for loading cutlery. You can remove the cutlery drawer partly to create more space in
the upper basket or you can remove it completely for easy loading.
(Figure 11)
1. If necessary, remove the cutlery drawer partly from the appliance.
2. If necessary, remove the cutlery drawer from the appliance.
(Figure 12)
3. Place the cutlery items in the drawer.
40 • English
| General | Details |
|---|---|
| Name | Inventum IVW6021A Dishwasher |
| Make | INVENTUM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INVENTUM VVW6040AB Building Depot Dishwasher
INVENTUM VVW6060AB Dishwasher
INVENTUM VVW6030AS dishwasher
INVENTUM VVW6008AW Dishwasher
Inventum VVW6046AB Dishwasher
INVENTUM VVW4530AW Dishwasher
INVENTUM VVW6046AW Dishwasher
INVENTUM IVW6008AXL Dishwasher
INVENTUM VVW6035AW Dishwasher
INVENTUM IVW6015A Dishwasher
COSMO COS-DWD24FBR Front Tall Tub Dishwasher
Not mentioned WFE 2B19 X UK Dishwasher
BOSCH SMV6ECX51E Dishwasher
BOSCH SHE4AEM6BK 100 Series Plus Recessed Handle Dishwasher
Miele G 7191 SCVi AD 125 Dishwasher
Haier HDW13F0S1 Hygiene Dishwasher
Electrolux ESA47300UW Dishwasher
FISHER AND PAYKEL DW60CHPX1 Dishwasher
CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
EQUATOR 2240 Dishwasher