Meiko FV 40.2 Glass and Dishwasher
3.2
Misuse
The dishwasher must not be used for:
•
•
•
Washing kitchen utensils with electrical components
Cleaning textiles, oven cloths or steel sponges
Washing utensils made of iron or utensils that must not come into contact
with foodstuff (e.g. ashtrays, candlesticks, etc)
•
•
•
•
•
•
•
•
•
•
•
Cleaning living creatures
Washing food for subsequent consumption
Preparing foodstuff in the machine
Taking wash water to prepare food or for drinking
Washing support grids of electric ranges / grills of gas ranges
Filling the machine from an external source (e.g. shower)
Disposing of dirty water using the dishwasher (e.g. from a cleaning bucket)
Standing or sitting on machine parts (e.g. door)
Washing dishes made of wood or dishes that have wooden parts
Washing plastic parts that are not resistant to heat and alkaline solution
Washing parts made of aluminum (pots, containers, or trays, for example,
with a suitable detergent only to avoid black discoloration)
•
Conversions and modifications by means of non-approved conversion kits
3.3
Safety information
•
•
Do not open the door while the program is running.
Only operate the dishwasher when it is in perfect working order. All
protection devices and housing parts as well as the tank cover sieve must be
installed.
•
•
Place washware, in particular small items, in the appropriate rack inserts.
The washware must not come into contact with the wash arms/rinse arms of
the dishwasher.
•
•
•
•
Wear suitable work clothing, protective gloves and sturdy shoes.
Do not wear rings, necklaces or other pieces of jewelry.
Connect the suction lances of the dishwasher correctly to the canisters.
Use optional bought-in parts in accordance with the associated instructions.
8 / 64
9020132
Model
F
V
40.2/40.2G
Electrical connection, see page 25.
•
The power supply must be fused in accordance with the regulations and a
lockable main switch provided in the local electrical installation.
•
The electrical safety of this machine is only ensured if it is connected to a
properly installed protective conductor system. It is very important to verify
this fundamental safety feature. If in doubt, have the building wiring checked
by an electrically skilled person.
•
Carry out the protective measures as well as the the equipotential bonding
connection in accordance with the regulations of the local power supply
companies as well as the locally applicable regulations.
Fresh water connection
•
•
•
Installation components must be suitable and permitted in accordance with
local regulations.
Turn off the shut-off valve of the fresh water supply line before carrying out
installation work. Check that all lines are securely connected and tight.
When replacing an old machine with a new one, make sure that the existing
feed hose is exchanged for the new feed hose supplied with the machine.
Environment
•
•
•
Do not remove safety and warning notices from the dishwasher and ensure
they are legible. Replace any damaged safety and warning notices.
Do not process hazardous substances (hazardous to health, especially toxic,
highly flammable and explosive substances) in the machine.
Do not operate the dishwasher in a potentially explosive atmosphere.
Maintenance and repair
•
Observe the maintenance specifications and intervals, including those of
optional bought-in parts.
•
•
Only use original spare parts from the manufacturer.
Before opening the housing parts, ensure the local main switch has been
disconnected from power and secured so that it cannot be switched on
again.
Conversions
•
Installation of an external dosing system is possible. Other modifications to
the machine are not permissible.
9020132
9 / 64
•
The safety of the dishwasher must not be impaired by the subsequent
installation of a dosing system. Only use dosing technology approved by
MEIKO.
3.4
3.5
What to do in the event of an emergency
•
In dangerous situations, disconnect the machine from
the power supply using the available main switch.
Safety notices on the machine
The safety notice is located on the right side panel and on the rear panel.
3.6
Requirements for the personnel
Installation, commissioning, instruction, repairs and maintenance of MEIKO
products may only be carried out by authorized service partners.
The operator must check the area around the machine or system for hazards to
other persons, e.g. children or persons with reduced physical, sensory or
mental capabilities, or with a lack of experience or knowledge.
During operation it must be ensured that:
•
Only adequately trained and instructed personnel are allowed to work on the
machine.
•
Personnel responsibilities for operation, maintenance and repairs must be
clearly defined.
10 / 64
9020132
| General | Details |
|---|---|
| Name | Meiko FV 40.2 Glass and Dishwasher |
| Make | MEIKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.59 MB |
(1 votes, average: 5.00 out of 5)
Loading...
MEIKO UPster U 400 M2 Glass and Dishwasher
BOSCH SMS4HTW00E Dishwasher
FISHER AND PAYKEL DD60SHTI9 Dishwasher
INVENTUM VVW4530AW Dishwasher
Fisher and Paykel DW60FC6X1 FP AA Dishwasher
BOSCH SPI2HKS59E Dishwasher
FISHER AND PAYKEL DD24DI9 N Dishwasher
Hotpoint N10003102 Dishwasher
BOSCH SHX53CM5N 300 Series Dishwasher
FOTILE BD2BV01 Dishwasher
Bauknecht AUTBFC3C26 Dishwasher