Home > MEIKO > Meiko FV 40.2 Glass and Dishwasher

Meiko FV 40.2 Glass and Dishwasher

Model  
F
V
40.2/40.2G  
Turn on the main switch.  
Vent the pipes for the chemicals and check for correct dosing.  
9.3  
Venting (priming) the pipes  
Venting of the detergent or rinse pipes must be performed during  
commissioning to fill the pipes with detergent and rinse aid.  
The pipes must also be vented if the dosing units have sucked in air. This  
occurs if a canister is completely emptied during operation, or if one of the  
suction lances was not inserted all the way to the bottom of the canister.  
For machines with external dosing systems, the detergent and rinse pipes must  
be vented in accordance with the manufacturer instructions.  
For machines with built-in dosing systems, vent the pipes as follows:  
1. Press the STOP key for approx. 5  
seconds until CodE 1- - - - - is  
displayed.  
2. Press the START key 5 times until  
1-1 - - - - - is displayed.  
3. Press the program key I. 1-2 - - - - -  
is displayed.  
4. Press the START key. Priming of  
the rinse pipe will start. The time  
remaining is displayed. By default,  
priming takes 180 seconds.  
5. If the time has expired and 1-2 - - -  
- - is displayed, press program key  
I. 1-3 - - - - - is displayed.  
6. Press the START key. Priming of  
the detergent pipe will start. The  
time remaining is displayed. By  
default, priming takes 30 seconds.  
7. If the time has expired and 1-3 - - -  
- - is displayed, press the STOP  
key to switch the machine off.  
9020132  
33 / 64  
 
GeneralDetails
NameMeiko FV 40.2 Glass and Dishwasher
MakeMEIKO
LanguageEnglish
FiletypePDF (Download)
File size2.59 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
MEIKO UPster U 400 M2 Glass and Dishwasher
MEIKO UPster U 400 M2 Glass and Dishwasher

Meiko FV 40.2 Glass and Dishwasher