×
- 1. Model Fv 40.2/40.2g (Installation, Operation And Maintenance → Operation, Product Description And Safety)
- 2. Notes On The Operating Instructions (Guarantee → Safety → Product Description → Technical Data)
- 3. Safety Symbols In The Instructions (Guarantee → Safety → Intended Use)
- 4. Misuse (Safety Information)
- 5. Qualified Personnel (Operation, Use → Cleaning → Troubleshooting → Maintenance)
- 6. Electromagnetic Compatibility (Product Description → Functional Description)
- 7. Overview Illustration (Membrane Keypad)
- 8. Key (Start Key With Control Light → Stop Key → Program Keys 13 With Control Lights → Program Selection)
- 9. Model Fv 40.2/40.2 G (Wash Programs → Program Assignment → Setpoint For Wash Cycle Time → Setpoint For Boiler Temperature)
- 10. Rating Plate (Model Name → Serial Number → Voltage → Frequency)
- 11. Detergent And Rinse Aid (Detergent → Rinse Aid)
- 12. Checking The Correct Dosing Settings (Dosing Units → Change Of Products)
- 13. Procedure For Changing The Detergent Product (Additional Equipment → Technical Data)
- 14. Noise Emission (Transport → Important → Note)
- 15. Requirements For Installation (Requirements For The Installation Location → Requirements For The Wastewater Connection)
- 16. Requirements For The Fresh Water Connection (Recommended Water Hardness → Recommended Water Temperature → Pressure Range Of The Fresh Water Supply Flow Pressure Upstream Of The Solenoid Valve → Measures To Ensure Correct Water Pressure)
- 17. Installation (Important → Removing The Rear Panel)
- 18. Electrical Installation
- 19. Protective Equipotential Bonding (Connecting The Fresh Water Pipe → Damage To Property Due To Deposits → Important)
- 20. Connecting The Wastewater Pipe
- 21. Connection For Wastewater Temperature Control (optional) (Connection Procedure:)
- 22. Connecting The Dosing System (Drain Connection → Fresh Water Connection → Strain Relief For Electrical Supply → Detergent Pipe (transparent))
- 23. Caution (Connecting The Detergent And Rinse Aid Canisters → Risk Of Injury From Contact With Chemicals)
- 24. Model Fv40.2/40.2g (Insert The Rinse Aid Suction Lance And The Detergent Suction Lance → Terminating The Installation)
- 25. Commissioning (Checking The Requirements For Commissioning → Performing Commissioning)
- 26. Venting (priming) The Pipes
- 27. Operation/use (Prior To Switching On The Machine → Risk Of Injury From Contact With Chemicals)
- 28. Model Fv40.2/40.2g (Note)
- 29. Starting Up The Dishwasher (Washing → Useful Information For Loading The Washware)
- 30. Model Fv40.2/40.2g (Selecting The Wash Program)
- 31. Starting The Wash Cycle (Pre-wash → Insert The Rack Into The Dishwasher → Press The Start Key → Change The Program, If Required)
- 32. Unloading The Washware (Caution)
- 33. Switching Off The Machine (Danger Of Scalding)
- 34. Replacing The Canisters (Risk Of Injury From Contact With Chemicals → Important → Rinse Aid Empty → Detergent Empty)
- 35. Malfunctions (Common Malfunctions → Possible Cause → Remedy)
- 36. Messages (Information Messages → Error Messages → Possible Cause → Measures/remedy)
- 37. Info Description (Err Description → Possible Cause → Measures/remedy)
- 38. Err Description (Possible Cause → Measures/remedy → Further Operation Not Possible → Call Service Technician)
- 39. Err Description (Possible Cause → Measures/remedy → Tank Level Analysis Disrupted → Aquastop Does Not Close Correctly)
- 40. Err Description (Possible Cause → Measures/remedy → Modifying The Settings → Please Contact Your Authorized Meiko Customer Service If:)
- 41. Level 1: Advanced Settings (code 11111) (Level 2: Dosing Settings (code 40044) → Viewing The Parameters)
- 42. Venting (priming) The Pipes
- 43. Level 2 (Dosing Quantity For Rinse Aid → Dosing Quantity For Detergent → Activation Mode For Rinse Aid Dosing Unit → Activation Mode For Detergent Dosing Unit)
- 44. Cleaning The Interior (Caution - Danger Of Burns From Hot Machine Parts → Caution - Property Damage To Electrics Due To Water Ingress → Important)
- 45. Remove The Tank Cover Sieve (Take The Wash Arms → Remove All Food Residues → Rinse The Filters, Sieves And The Wash And Rinse Arms → Reinstall All Parts In Reverse Order)
- 46. Cleaning The Membrane Keypad (Cleaning The Outer Stainless Steel Surfaces → Cleaning The Surrounding Area → Descaling)
- 47. Operating The Dishwasher Using Hard Water (Notes On Descaling → Maintenance)
- 48. Danger Of Injury When Entering A Danger Zone (Danger Of Burns From Hot Wash Water, Hot Washware And Hot Machine Parts → Environmental Damage Due To Improper Disposal Of Liquids)
- 49. Maintenance (Important → Maintenance Table → Maintenance Requirement → Wear Parts Include, For Example:)
- 50. Maintenance Requirements (Casing And Built-in Components → Fresh Water Installation → Wastewater Installation → Electrical Installation)
- 51. Maintenance Work (Water Quality, Temperature → Dismantling And Disposal → Disposal Of Packaging Materials)
- 52. Dismantling And Disposal Of The Old Machine (Risk Of Injury From Contact With Chemicals → Observe The Safety Data Sheets And Dosing Recommendations → Use Safety Eyeware → Wear Protective Gloves)
- 53. Change Of Products (Electrical Installation → Electromagnetic Compatibility → Functional Description → Installation)
×
Meiko FV 40.2 Glass and Dishwasher
Model
F
V
40.2/40.2G
11 Cleaning
11.1 Cleaning the interior
CAUTION - Danger of burns from hot machine parts
•
•
•
Allow the machine to cool down before cleaning.
Wear protective gloves, if necessary.
Only use the handles provided for opening or closing.
CAUTION – Property damage to electrics due to water ingress
•
Never wash the machine, control cabinets and other electrical components
using a water hose or high-pressure cleaner.
•
•
Make sure that no water can enter the machine unintentionally.
If installed at ground level, never flood the surrounding room.
IMPORTANT
Do not use a foaming hand dishwashing detergent for pre-cleaning the
dishes. Do not use detergents or stainless steel cleaning agents on the
interior of the machine. Foam causes malfunctions and poor washing
results.
1. Switch off and drain the machine,
see page 40.
2. Open the door.
9020132
51 / 64
| General | Details |
|---|---|
| Name | Meiko FV 40.2 Glass and Dishwasher |
| Make | MEIKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.59 MB |

MEIKO UPster U 400 M2 Glass and Dishwasher


FISHER AND PAYKEL DD60DHI9-CN Dishwasher

BOSCH SMV6HVX01I Integrated Dishwasher

BOSCH SMS2HVW66G Dishwasher

SIEMENS SN25ZI49CE Free Standing Dishwasher

Haier HDW15U3B1 Steam Built Under Dishwasher

AEG FFB74707PM Dishwasher

Master Kitchen FI60514 Dishwasher

Whirlpool W8I HP42 L MaxiSpace Dishwasher

SHARP SDW6888JS Smart Dishwasher

BUFFALO DK775,DN975 Dishwasher
Table of Contents
- 1. Model Fv 40.2/40.2g - Installation, Operation And Maintenanc... →
- 2. Notes On The Operating Instructions - Guarantee →
- 3. Safety Symbols In The Instructions - Guarantee →
- 4. Misuse - Safety Information →
- 5. Qualified Personnel - Operation, Use →
- 6. Electromagnetic Compatibility - Product Description →
- 7. Overview Illustration - Membrane Keypad →
- 8. Key - Start Key With Control Light →
- 9. Model Fv 40.2/40.2 G - Wash Programs →
- 10. Rating Plate - Model Name →
- 11. Detergent And Rinse Aid - Detergent →
- 12. Checking The Correct Dosing Settings - Dosing Units →
- 13. Procedure For Changing The Detergent Product - Additional Eq... →
- 14. Noise Emission - Transport →
- 15. Requirements For Installation - Requirements For The Install... →
- 16. Requirements For The Fresh Water Connection - Recommended Wa... →
- 17. Installation - Important →
- 18. Electrical Installation →
- 19. Protective Equipotential Bonding - Connecting The Fresh Wate... →
- 20. Connecting The Wastewater Pipe →
- 21. Connection For Wastewater Temperature Control (optional) - C... →
- 22. Connecting The Dosing System - Drain Connection →
- 23. Caution - Connecting The Detergent And Rinse Aid Canisters →
- 24. Model Fv40.2/40.2g - Insert The Rinse Aid Suction Lance And ... →
- 25. Commissioning - Checking The Requirements For Commissioning →
- 26. Venting (priming) The Pipes →
- 27. Operation/use - Prior To Switching On The Machine →
- 28. Model Fv40.2/40.2g - Note →
- 29. Starting Up The Dishwasher - Washing →
- 30. Model Fv40.2/40.2g - Selecting The Wash Program →
- 31. Starting The Wash Cycle - Pre-wash →
- 32. Unloading The Washware - Caution →
- 33. Switching Off The Machine - Danger Of Scalding →
- 34. Replacing The Canisters - Risk Of Injury From Contact With C... →
- 35. Malfunctions - Common Malfunctions →
- 36. Messages - Information Messages →
- 37. Info Description - Err Description →
- 38. Err Description - Possible Cause →
- 39. Err Description - Possible Cause →
- 40. Err Description - Possible Cause →
- 41. Level 1: Advanced Settings (code 11111) - Level 2: Dosing Se... →
- 42. Venting (priming) The Pipes →
- 43. Level 2 - Dosing Quantity For Rinse Aid →
- 44. Cleaning The Interior - Caution - Danger Of Burns From Hot M... →
- 45. Remove The Tank Cover Sieve - Take The Wash Arms →
- 46. Cleaning The Membrane Keypad - Cleaning The Outer Stainless ... →
- 47. Operating The Dishwasher Using Hard Water - Notes On Descali... →
- 48. Danger Of Injury When Entering A Danger Zone - Danger Of Bur... →
- 49. Maintenance - Important →
- 50. Maintenance Requirements - Casing And Built-in Components →
- 51. Maintenance Work - Water Quality, Temperature →
- 52. Dismantling And Disposal Of The Old Machine - Risk Of Injury... →
- 53. Change Of Products - Electrical Installation →


































































