SHARP QW-NA24S42DI-EE Dishwasher
2. INSTALLATION
WARNING: Use the new water inlet
hose supplied with your machine, do not
use an old machine’s hose.
2.1. Machine positioning
When positioning the machine, place it in
an area where dishes can be easily loaded
and unloaded. Do not put the machine in an
area where the ambient temperature falls
below 0°C.
WARNING: Run water through the
new hose before connecting.
Read all warnings located on the packaging
before removing the packaging and
positioning the machine.
Place the machine close to a water tap
and drain. Take into consideration that the
connections will not be altered once the
machine is in position.
WARNING: Connect the hose
directly to the water inlet tap. The pressure
supplied by the tap should be a minimum
of 0.03 MPa and a maximum of 1 MPa. If
the pressure exceeds 1 MPa, a pressure
relief valve must be fitted between the
connection.
WARNING: After the connections are
made, turn the tap on fully and check
for water leaks. Always turn off the
water inlet tap after a wash program has
finished.
Do not hold the machine by its door or
panel.
Leave an adequate distance around the
machine to allow ease of movement when
cleaning.
Ensure the water inlet and outlet
hoses are not squeezed or trapped
and that the machine does not stand
on the electrical cable while positioning.
Adjust the feet so the machine is level and
balanced. The machine should be placed
on flat ground otherwise it will be unstable
and the door of the machine will not close
properly.
An Aquastop water spout is available
with some models. Do not damage it
or allow it to become kinked or
twisted.
2.2. Water connection
We recommend fitting a filter to your water
inlet supply in order to prevent damage to
your machine due to contamination (sand,
rust, etc.) from indoor plumbing. This will
also help prevent yellowing and deposit
formation after washing.
Note printing on the water inlet hose!
If models are marked with 25°, the water
temperature may be max. 25 °C (cold
water).
For all other models:
Cold water preferred; hot water max.
temperature 60 °C.
2.3. Water inlet hose
EN - 6
| General | Details |
|---|---|
| Name | SHARP QW-NA24S42DI-EE Dishwasher |
| Make | Sharp |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.04 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SHARP SDW6506JS 24 Front Dishwasher
SHARP SDW6888JS Smart Dishwasher
SHARP QW-NA1BF47EI-EU Series Dishwasher
SHARP SDW6767HS Dishwasher
SHARP SDW6767HS Slide In Smart Dishwasher
SHARP SDW6767HS Smart Dishwasher
SHARP QW-NA26F39DI-EN Dishwasher
SHARP QW-NS1CF49EI-ES Dishwasher
SHARP SDW6757ES Dishwasher
SHARP QW-NA25GU44BS-DE Undercounter Dishwasher
beko BDIN38650C Dishwasher
FISHER AND PAYKEL DW60FC4B2 Dishwasher
IKEA AA-2360858-2-1 RENGÖRA Dishwasher
FISHER PAYKEL DD24STX6I1 Tall Dishwasher
FISHER AND PAYKEL DD24DI9 N Dishwasher
BOSCH SMS4EVI00E Dishwasher
FISHER and PAYKEL DD24DHTI9N Tall Drawer Dishwasher
ZLINE Monument Top Touch Dishwasher
AEG FSB53927Z Integrated Dishwasher
Haier HDW15U3S1 Built Under Dishwasher