HOOVER HI 4E7L0S-80 Semi Integrated Dishwasher
2. WATER CONNECTION
If the dishwasher is connected to new
pipes or to pipes which have not been
inuse for a long time run water through for
a few minutes before connecting the inlet
hose. In this way no deposits of sand or
rust will clog up the water inflow filter.
The appliance must be connected to
the water mains using new hose-sets.
The old hose-sets should not be
reused.
The inlet and drain hoses can be directed
to left or right.
The dishwasher can be connected to
either cold or hot water, as long as it
is no hotter than 60°C.
Water pressure must be between 0,08
MPa and 1 MPa.
The inlet hose must be connected to a tap
so that the water supply can be cut off
when the machine is not in use (fig.1).
The dishwasher is fitted with 3/4" threaded
connector (fig.2).
Connect inlet hose "A" to water tap "B"
with a 3/4" attachment making sure that it
has been properly tightened.
If it is necessary, the inlet pipe can be
lengthened up to 2,5 m. The extension
pipe is available from the After Sales
Service Centre.
8
| General | Details |
|---|---|
| Name | HOOVER HI 4E7L0S-80 Semi Integrated Dishwasher |
| Make | Hoover |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.8 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HOOVER HI 3E9E0S Dishwasher
HOOVER HV-D13SS 13 Place Dishwasher
Hoover 32901787 Dishwasher
KitchenAid W11589937B Dishwasher
BOSCH SHS53CM5N Dishwasher
FISHER PAYKEL DW60UC2X2 Built-Under Dishwasher
SIEMENS SN25IW00TI Free Standing Dishwasher
CMA DISHMACHINES CMA-180UC Dishwasher
BOSCH SMS6HMW01R Dishwasher
BOSCH SGV4HTX27G Dishwasher
FISHER PAYKEL DD24DCTX9 N Double Dishwasher
ARDESTO DWMB-V459SMT3 Dishwasher
Miele HG07-W Fully Dishwasher