INVENTUM VVW6060AB Dishwasher
Note:
Detergent is available in powder, gel and tablets and is also available as a combined product (with
salt and/or rinse aid). When using a combined detergent, set your water hardness level and rinse aid
consumption to the lowest setting.
We advise not to use a combined detergent in short programmes, powder detergents are better. If you
encounter problems when using combined detergents, please contact the manufacturer of the detergent.
Observe the instructions of the packaging.
Consider using half a tablet when washing half a load.
When you stop using combined detergents, make sure the water hardness and rinse aid setting are set
to the correct level.
1. Make sure that you fill the detergent reservoir before you start the appliance.
(Figure 11)
(Figure 12)
2. Push the latch (A) to open the detergent reservoir.
3. Fill the reservoir (B) with detergent:
a. Use 25 grams of detergent for heavily soiled dishes.
b. Use 15 grams of detergent for lightly soiled dishes.
Caution:
The detergent reservoir has a capacity of 40 grams. Do not overfill the detergent reservoir. This can
result in poorly dissolving detergent and damage to your glassware.
4. Close the detergent reservoir.
5. Select a program.
6. Close the door.
FILLING THE RINSE AID RESERVOIR
Rinse aid is used to prevent traces of water droplets on clean dishes and increases drying performance.
Caution:
Only use rinse aid that is suitable for dishwashers.
Note:
Fill the rinse aid reservoir when the rinse aid indicator on the control panel is on.
(Figure 13)
(Figure 14)
1. Open the rinse aid reservoir (A).
2. Fill the reservoir (B) with rinse aid until the MAX level.
Caution:
Remove any spilled rinse aid immediately. Spilled rinse aid can form extreme foam which can cause
leaks.
SETTING THE LEVEL OF RINSE AID CONSUMPTION
When water stains form on your dishes after a wash cycle, you have to increase the level of rinse aid consumption.
When blue stains form on your dishes after a wash cycle, you have to decrease the level of rinse aid consumption.
Set the level of rinse aid consumption according to the information in section Rinse aid consumption settings.
Note:
As a default, the level of rinse aid consumption of the appliance is set to level 4.
1. Start the appliance. Refer to section Starting the appliance.
2. Push and hold the program selector button for at least 5 seconds.
3. Release the program selector button when the display briefly shows rA.
4. The display shows the latest setting of the rinse aid consumption.
English • 49
| General | Details |
|---|---|
| Name | INVENTUM VVW6060AB Dishwasher |
| Make | INVENTUM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INVENTUM VVW6040AB Building Depot Dishwasher
INVENTUM VVW6030AS dishwasher
INVENTUM VVW6008AW Dishwasher
Inventum VVW6046AB Dishwasher
Inventum IVW6021A Dishwasher
INVENTUM VVW4530AW Dishwasher
INVENTUM VVW6046AW Dishwasher
INVENTUM IVW6008AXL Dishwasher
INVENTUM VVW6035AW Dishwasher
INVENTUM IVW6015A Dishwasher
BOSCH SMV4ECX21E-38 Dishwasher
Whirlpool D2I HD526 A Integrated Dishwasher
HOOVER HI 4E7L0S-80 Semi Integrated Dishwasher
Indesit I0F D641A Dishwasher
kogan KABNCHTPDWA Benchtop Dishwasher
Whirlpool W2IHKD526A Fully Integrated Dishwasher
IKEA MEDELSTOR 45cm Dishwasher
BOSCH SMS4EMI06G Dishwasher
Bertazzoni DW24T3IXV Dishwasher
LG LDTH7972D Smart Dishwasher