Home > Miele > Miele PFD 401 U Commercial Dishwasher

Miele PFD 401 U Commercial Dishwasher

Troubleshooting  
General problems with the dishwasher  
Problem  
Possible cause and solution  
The dishwasher does not  
The dishwasher is switched off after 10 minutes to save en-  
respond to any button. The ergy.  
indicator lights and the dis-  
play are dark.  
Press the button to switch the dishwasher back on.  
The display is dark and the The dishwasher is switched to standby mode after 10 min-  
Start/Stop button is flash- utes to save energy.  
ing.  
Press any button to exit standby mode.  
The following fault mes-  
sage appears on the display  
before the program starts:  
Salt container lid: check fit.  
The salt container is not closed properly.  
Close the container properly.  
Salt residues are preventing it from closing.  
Remove the salt residues from the refilling funnel, the lid,  
and the seal. Do not use running water to rinse away salt  
residues as this can cause the container to overflow.  
Close the container properly.  
The following fault mes-  
sage appears on the dis-  
play:  
F553 Salt container: Turn ap-  
pliance off and on. Close flap  
in the door correctly. If fault  
persists, contact service.  
Service phone: Serial number:  
The salt container flap has sprung open during a program.  
When the door is opened, hot steam and process  
chemicals can escape!  
Open the door and close the container flap.  
The following fault mes-  
sage appears on the dis-  
play:  
The filter combination in the base of the wash cabinet is  
not inserted correctly. The program does not start.  
Open the door and insert the entire filter combination  
correctly; see “Cleaning and care, Cleaning filters in the  
wash cabinet.  
Program lock filter  
The dispenser cover cannot Detergent residue is blocking the latch.  
be closed.  
Remove the detergent residue.  
The inside of the door and/  
or the interior walls are wet  
after a program has fin-  
ished.  
This is not a fault.  
It is caused by the drying system.  
The moisture will dissipate after a short while.  
Water remains in the wash Before remedying the fault:  
cabinet at the end of the  
program.  
(This does not apply to the  
Rapid program)  
Turn the dishwasher off with the button.  
The filter combination in the wash cabinet is clogged.  
Clean the filter combination (see “Cleaning and care”).  
The drain pump or non-return valve is blocked.  
Clean the drain pump or the non-return valve (see “Fre-  
quently asked questions”).  
The drain hose is kinked.  
Remove any kinks from the drain hose.  
The on-site drain siphon is blocked.  
Check and clean the drain siphon.  
88  
 
GeneralDetails
NameMiele PFD 401 U Commercial Dishwasher
MakeMiele
LanguageEnglish
FiletypePDF (Download)
File size5.12 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele 11 836 740 Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 104 SCVi Dishwasher
Miele PFD 104 SCVi Dishwasher

Miele PFD 401 U Commercial Dishwasher