Miele PFD 401 U Commercial Dishwasher
Installation
Installation
Undercounter installation
Damage caused by condensation.
In order to reduce the risk of damage from
condensation, the cabinetry in the area
around the dishwasher should be de-
signed for commercial use.
Risk of the machine tipping.
To ensure stability, an undercounter dish-
washer must only be installed beneath a
continuous countertop that is bolted to
the adjacent cabinetry.
Only use cabinetry that is designed for
commercial use.
Install the dishwasher underneath a
bolted continuous countertop.
The dishwasher must be stable and horizon- If the dishwasher is to be installed beneath a
tal. Any unevenness in the floor level and
height of the machine can be compensated
for by adjusting the four feet.
continuous countertop, an installation space
measuring at least 23 5/8" (600 mm) wide,
23 5/8" (600 mm) deep, and 32 5/16"
(820 mm) high is required.
Dishwashers with active drying require an
installation space measuring 22 3/4"
(580 mm) in depth.
Dishwashers with a plinth return are sup-
plied with a toe-kick filler panel. This can be
installed instead of a toe-kick board.
When adjusting the dishwasher height,
the feet must not be unscrewed by more
than 2 3/8" (60 mm).
The machine height can be adjusted from 32
5/16"-34 5/8" (820–880 mm) using the
machine feet. Dishwashers with lids have an
additional 9/16" (15 mm) in height.
The front machine feet can be adjusted with
a wrench (wrench size 13); the rear ones can
be adjusted with a T20 Torx screw.
If the runners of the rear machine feet are
not installed, the machine feet can also be
adjusted with the wrench.
Hose holder
The supplied hose holders can be used to
lay the power cord and the hoses for supply
and waste water in a way that saves space.
The hose holder prevents hoses from kinking
or crushing when installing the machine in
tight recesses.
The power cord and hoses can be laid either
on the left or the right, depending on the
connection situation.
They are adjusted upward when turned
clockwise and downward when turned
counterclockwise.
If the dishwasher is to be installed next to
other machines and cabinetry or in a recess,
an installation space measuring at least 23
5/8" (600 mm) in width and 23 5/8"
(600 mm) in depth is required.
Dishwashers with active drying require a
space measuring 22 3/4" (580 mm) in
depth.
101
| General | Details |
|---|---|
| Name | Miele PFD 401 U Commercial Dishwasher |
| Make | Miele |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.12 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 104 SCVi Dishwasher
FRIGIDAIRE FDPC4221AS Dishwasher
FISHER PAYKEL DW60UZ6B FP AA Built-under Dishwasher
FISHER PAYKEL DD24DCHTX9N Sanitize Dishwasher
Whirlpool W8I HP42 L MaxiSpace Dishwasher
BOSCH 81739 Dishwasher
FORNO WQP12-6502 Pozzo Dishwasher
FISHER PAYKEL DD60ST4HZB9 Single DishDrawer Dishwasher
BOSCH SMH4ECX21E Dishwasher
Electrolux GA60SLICCN Dishwasher
smeg STU8633 Fully Integrated Dishwasher