SHARP SDW6506JS 24 Front Control Dishwasher
INSTALLATION PREPARATION
CABINET DIMENSIONS
• The cabinet opening must be at least 24" deep.
WATER SUPPLY REQUIREMENTS
• Water pressure from the hot water supply line must be between
20-120 psi (138-862 kPa).
• The cabinet opening must be between 34" and 35" in height.
• Water heater that is adjusted to a water temperature of 120°F to
150°F (49°C to 65.5°C).
3
• A copper tubing water line (minimum /8" in diameter) extending
90˚
90˚
at least 24" from the rear wall must be routed to connect to the
front-left side of the dishwasher.
34" min.
to 35"
max.
• It is strongly recommended that a hand shut-off valve be installed
in an accessible location, such as under the sink.
13
22 /16"
18"
3"
min.
DRAIN REQUIREMENTS
• Follow local codes and ordinances.
3"
1
5 /2"
• The drain hose must not be longer than 10 feet in length.
• Do not connect drain lines from other devices to the dishwasher
drain hose.
3
3
1 /4"
1 /4"
1
3 /2"
3
3
• The dishwasher must be connected to waste line with an air
gap (not supplied) or 32" minimum high drain loop (depending
on local codes and ordinances) to prevent back flow into the
dishwasher.
1 /4"
1 /4"
13
23 /16"
FIGURE A
• Air gap must be used if waste tee or disposer connection is less
than 18" above the floor to prevent siphoning.
CLEARANCES
When installed in a corner, allow 2" minimum clearance between
dishwasher and adjacent cabinets, walls or other appliances. Allow
27" minimum clearance from the front of the dishwasher for door
opening. See Figure B.
DRAIN PREPARATION
The type of drain installation depends on answers to the following
questions:
• Do local codes or ordinances require an air gap?
• Will waste tee or disposer connection be less than 18" above
the floor?
Countertop
Dishwasher
• Will installation have a drain loop less than 32" above the floor?
If the answer to ANY of the 3 questions above is YES, Method 1
MUST be used. Otherwise, either Method 1 or Method 2 may be used.
CAUTION
An air gap MUST BE USED if the drain hose is
connected to waste tee or disposer lower than 18" above the floor.
Failure to provide the proper drain connection height with air gap
or 32" minimum high drain loop will result in improper draining of
the dishwasher. Figure C or Figure D.
27"
METHOD 1 – AIR GAP WITH WASTE TEE OR
DISPOSER
Clearance for door
opening 2" minimum
FIGURE B
FIGURE C
5
| General | Details |
|---|---|
| Name | SHARP SDW6506JS 24 Front Control Dishwasher |
| Make | Sharp |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.37 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SHARP SDW6506JS 24 Front Dishwasher
SHARP SDW6888JS Smart Dishwasher
SHARP QW-NA1BF47EI-EU Series Dishwasher
SHARP QW-NA24S42DI-EE Dishwasher
SHARP SDW6767HS Dishwasher
SHARP SDW6767HS Slide In Smart Dishwasher
SHARP SDW6767HS Smart Dishwasher
SHARP QW-NA26F39DI-EN Dishwasher
SHARP QW-NS1CF49EI-ES Dishwasher
SHARP SDW6757ES Dishwasher
FISHER PAYKEL DD60ST4NX9 Built-Under Dishwasher
BOSCH SMS4ECI28E Dishwasher
BOSCH SMS23DW01T Dishwasher
Monsher MD 4502 Dishwasher
SIEMENS SN97T801BE Dishwasher
AMANA ADB1300AFS Full Console Dishwasher
BOSCH SHP78CP5N 800 Series Dishwasher
BOSCH SHX53CM5N Bar Handle Dishwasher
FRANKE FDW 614 Integrated Dishwasher
SIEMENS SX75EX11CE Fully Integrable Dishwasher