SHARP SDW6506JS 24 Front Control Dishwasher
INSTALLATION INSTRUCTIONS
DRAIN LINE INSTALLATION
STEP 6: CONNECT DRAIN HOSE
• Connect drain line to air gap, waste tee or disposer using either
previously determined method.
CONNECT DRAIN HOSE TO HOME PLUMBING
The drain hose will be connected to the house drain system after
the dishwasher is installed in the opening.
METHOD 1 – AIR GAP WITH WASTE TEE OR
DISPOSER
1
1 Drill a 1 /2" (3.8 cm) hole in cabinet wall or floor on the side of
the opening closest to the sink.
2 Grasp the sides of the dishwasher at the edges of the door panel,
and place the dishwasher in front of the opening.
3 Insert the drain hose into the hole in the cabinet wall.
4 Attach drain hose to the back of the dishwasher and secure with
a hose clamp.
Waste Tee Installation
Disposer Installation
A
B
A
B
C
Insulation blanket
Water line
Drain hose - maximum
lengh 10 ft (3.0 m)
House wiring
METHOD 2 – HIGH DRAIN LOOP WITH WASTE TEE OR
DISPOSER
C
Fasten to underside
of countertop
Fasten to underside
of countertop
D
E
D
Power cord (if needed)
E
32"
Min.
32"
Min.
18"
18"
Min.
Min.
CONNECT DRAIN LINE
FOLLOW ALL LOCAL CODES AND ORDINANCES.
Waste tee installation
Disposer installation
5
3
The drain hose molded end will fit /8", /4" or 1" diameter
connections on the air gap, waste tee or disposer. Cut on the marked
line as required for your installation.
IMPORTANT: When connecting drain line to disposer, make sure
that the drain plug has been removed. DISHWASHER WILL NOT
DRAIN IF PLUG IS LEFT IN PLACE.
Cutting lines
TIP: Avoid unnecessary service call charges. Always be sure
disposer drain plug has been removed before attaching dishwasher
drain hose to the disposer.
1"
3/4"
5/8"
WARNING
IMPORTANT: Do not cut corrugated portion of hose
• If a longer drain hose is required, add up to 42" of length for a
5
7
total of 10 feet to the factory installed hose. Use /8" or /8" inside
diameter hose and a coupler to connect the two hose ends. Secure
the connection with hose clamps.
Do not connect the drain hose to the sink drain waste tee or
garbage disposal without looping the drain hose underneath the
sink with a high drain loop. Doing so will cause the dishwasher
to not drain properly, which may allow drain water to back up in
the dishwasher tub or result in an E1 error code.
Hose Clamp
Coupler
Hose Clamp
• Secure the drain hose to the air gap, waste tee or disposer with
clamps.
NOTE: TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED
10 FEET FOR PROPER DRAIN OPERATION.
10
| General | Details |
|---|---|
| Name | SHARP SDW6506JS 24 Front Control Dishwasher |
| Make | Sharp |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.37 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SHARP SDW6506JS 24 Front Dishwasher
SHARP SDW6888JS Smart Dishwasher
SHARP QW-NA1BF47EI-EU Series Dishwasher
SHARP QW-NA24S42DI-EE Dishwasher
SHARP SDW6767HS Dishwasher
SHARP SDW6767HS Smart Dishwasher
SHARP SDW6767HS Slide In Smart Dishwasher
SHARP QW-NA26F39DI-EN Dishwasher
SHARP QW-NS1CF49EI-ES Dishwasher
SHARP SDW6757ES Dishwasher
KitchenAid KDTE104KPS Dishwasher
Mueller DW-1800 18 in. Black Front Digital Dishwasher
SAMSUNG DW80CG40 Series Dishwasher
Respekta GSP60TIDM Dishwasher
gorenje 642D65 Dishwasher
ETNA VWV142ZWA Dishwasher
Miele G 7719 Dishwasher
FISHER AND PAYKEL DW60UN2X2 Contemporary Built Under Dishwasher
SAMSUNG DW80N3030UW Front Control Dishwasher
BOSCH SRV2HKX39G Fully- Dishwasher