Home > Centerline > Centerline CDH ML-130374 Commercial Dishwasher

Centerline CDH ML-130374 Commercial Dishwasher

CENTERLINE™ ECOLINE™  
Installation and Operation Manual  
NOTICE!  
Water quality  
High iron levels in the water supply can cause staining and may require an iron filter.  
High chloride levels in the water supply can cause pitting and may require a chloride  
removal system. Contact Hobart Service or your local water treatment professional for  
proper water treatment.  
Sediment may require a particulate filter. Dissolved solids may require water treatment  
such as a water softener, reverse osmosis system, etc. Contact Hobart Service or your  
local water treatment professional for proper water treatment.  
5.6.2 Water Connection  
A water hammer arrestor (meeting ASSE-1010 Standard or equivalent) should be installed (supplied by  
others) in the common water supply line at the service connection.  
The plumber connecting this machine is responsible for making certain that water lines are  
THOROUGHLY FLUSHED OUT BEFORE connecting to the dishwasher. This "flush-out" is necessary to  
remove all foreign matter, such as chips (resulting from cutting or threading of pipes), pipe joint  
compound from the lines; or, if soldered fittings are used, bits of solder or cuttings from the tubing.  
Debris, if not removed, may lodge in the dishwasher's plumbing components and render them  
inoperative. Solenoid valves fouled by foreign matter and any expenses resulting from this fouling are  
NOT the responsibility of the manufacturer and associated repair costs are not covered under warranty.  
A manual shutoff valve (not supplied) should be installed upstream of the fill hose to accommodate  
servicing the machine. It is recommended that a line strainer (80 mesh) (not supplied) be installed in the  
supply line between the manual shutoff valve (not supplied) and the connection point on the machine.  
Make plumbing connections with ½” minimum copper piping OD (¾” recommended), with a ¾” male  
garden hose fitting (not supplied).  
Connect to hot water  
A water supply hose is provided.  
Temperature:  
Water Supply  
Sanitizing  
Mode  
Model  
Connection  
Minimum  
Maximum  
Recommended  
CDH  
EDH  
High Temperature  
Sanitizing  
Hot Water  
Hot Water  
110°F (43°C)  
N/A  
140°F (60°C)  
CDL  
EDL  
Chemical  
Sanitizing  
120°F (49°C)  
N/A  
140°F (60°C)  
Water hardness: max. 3 grains  
F41220 (August 2022)  
Ver2.0  
Page 18 of 60  
 
GeneralDetails
NameCenterline CDH ML-130374 Commercial Dishwasher
MakeCenterline
LanguageEnglish
FiletypePDF (Download)
File size1 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Centerline CUH-130363 Commercial Dishwasher
Centerline CUH-130363 Commercial Dishwasher
centerline CDH-1 51 Racks Hour Door Type Dishwasher
centerline CDH-1 51 Racks Hour Door Type Dishwasher

Centerline CDH ML-130374 Commercial Dishwasher