Home > Centerline > Centerline CDH ML-130374 Commercial Dishwasher
Centerline CDH ML-130374 Commercial Dishwasher
Installation and Operation Manual
CENTERLINE™ ECOLINE™
The dish tables are fastened to the machine using the included table support brackets. The support
brackets mount underneath the tabling and fasten to the machine using M5 screws included with the
machine. After the support bracket is aligned with the tabling, drill a locating hole and fasten using non-
rusting ¼” screws and locking nuts. Attach the included splash guards at the rear of the tabling using
non-rusting ¼” screws and locking nuts. The splash guards can be adjusted for fit depending on the
width of the tabling.
For straight-through installations, 30" clearance at the front and 15" clearance at the right side by 33-
1/8” clearance above the finished floor must be provided for service.
5.5.4 Corner Installation
Before placing the dishwasher in its operating location, check machine configuration. If the machine is
being installed in a corner, clearances of 30" out from the dishwasher under the left-hand tabling by 33-
1/8" above the finished floor and 15” out from the dishwasher at the right side by 33-1/8" above the
finished floor must be provided for servicing. For proper installation of a corner machine, the right
corner of the machine should be positioned where the two tables meet so that the gauges (if equipped)
are visible to the operator.
Page 15 of 60
Ver2.0
F41220 (August 2022)
| General | Details |
|---|---|
| Name | Centerline CDH ML-130374 Commercial Dishwasher |
| Make | Centerline |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1 MB |

Centerline CUH-130363 Commercial Dishwasher

centerline CDH-1 51 Racks Hour Door Type Dishwasher









































































