Home > Centerline > Centerline CDH ML-130374 Commercial Dishwasher
Centerline CDH ML-130374 Commercial Dishwasher
CENTERLINE™ ECOLINE™
Installation and Operation Manual
6.3.2 Detergent Sensor
The dishwasher has a 7/8” [22mm] diameter hole located on
the lower, left side of the tank used for installation of the
detergent sensor.
Remove the lower left panel by removing the two screws
at the bottom of the panel.
Remove the detergent sensor plug.
Install detergent sensor (supplied by others)
Detergent Sensor Plug
6.3.3 Rinse Agent Dispenser Tubing
The dishwasher has an 1/8” NPT port located on the rear,
right chamber for installation of the rinse agent feeder
tubing.
Remove the 1/8" NPT plug for installation of the rinse
agent dispenser tubing as needed.
Rinse Aid Port
6.3.4 Detergent and Rinse Agent Electrical Connections
WARNING!
Risk of electric shock
Electrical and grounding connections must comply with the applicable portions of the
National Electrical Code, NFPA 70 (latest edition) and/or other local electrical codes.
Disconnect the electrical power to the machine and follow lockout/tagout
procedures. Be sure all circuits are disconnected.
This machine must be operated with an automatic detergent feeder, including a visual means to verify
that detergents and sanitizers are delivered or a visual or audible alarm to signal if detergents and
sanitizers are not available for delivery to the respective washing and sanitizing systems. Refer to the
installation section of this manual and to the chemical feeder equipment manual(s).
F41220 (August 2022)
Ver2.0
Page 30 of 60
| General | Details |
|---|---|
| Name | Centerline CDH ML-130374 Commercial Dishwasher |
| Make | Centerline |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1 MB |

Centerline CUH-130363 Commercial Dishwasher

centerline CDH-1 51 Racks Hour Door Type Dishwasher









































































