Home > Centerline > Centerline CDH ML-130374 Commercial Dishwasher
Centerline CDH ML-130374 Commercial Dishwasher
CENTERLINE™ ECOLINE™
Installation and Operation Manual
3
PRODUCT DESCRIPTION
3.1 Intended purpose
The machine is an item of technical equipment intended solely for commercial dishwashing.
The machine is designed solely for cleaning ware (porcelain, glass, ceramic, temperature-resistant
plastics, stainless steel or similar) from the food industry.
3.2 General
Models CDH, CDL, EDH, and EDL dishwashers can be configured for both straight through or corner
operation. CDH, CDL, EDH, and EDL dishwashers are shipped from the factory in straight through
configuration. Straight through machines can be easily converted to corner operation.
The CDH and EDH dishwashers are designed to operate in high temperature sanitizing mode only
(Designated by the temperature requirements of 150°F Wash and 180°F Rinse. These temperatures can
be found on the label located on the lower, left part of the front panel).
The CDL and EDL dishwashers are designed to operate in chemical sanitizing mode only (Designated by
the temperature requirements of 120°F Wash and 120°F Rinse. These temperatures can be found on
the label located on the lower, left part of the front panel).
The serial number can be found on the machine data label located at the bottom of the right side of the
machine.
Hobart supplied chemical pumps ship standard with the CDL and EDL models. Chemical pumps are
available as an accessory kit (field installed) for the CDH and EDH models or contact your chemical
representative for a chemical feeder system to be supplied and installed by others. This machine must
be operated with an automatic detergent feeder, including a visual means to verify that detergents are
delivered or a visual or audible alarm to signal if detergents are not available for delivery to the washing
systems. See instructions for electrical and plumbing connections located in this manual and in the
feeder equipment manual.
The wash pump motor has thermal overload protection.
The supply line incorporates an air gap on the CDH and EDH models and a vacuum breaker on the CDL
and EDL models to prevent any reverse flow of water from the dishwasher into the potable water
supply. The unit, once turned on, fills the wash tank to the appropriate level and automatically stops
filling once the level is reached. A pressure transducer reads the water level in the wash tank and shuts
off the heat supply if the water level becomes too low. When the water returns to the proper level, the
heating circuit becomes operational again.
An automatic pumped drain is standard on all models.
A pumped rinse system is standard on the CDH and EDH models.
F41220 (August 2022)
Ver2.0
Page 10 of 60
| General | Details |
|---|---|
| Name | Centerline CDH ML-130374 Commercial Dishwasher |
| Make | Centerline |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Centerline CUH-130363 Commercial Dishwasher
centerline CDH-1 51 Racks Hour Door Type Dishwasher
FISHER AND PAYKEL DD24DTI9 N Integrated Dishwasher
S LT GGSDW6012BS Dishwasher
Danby DDW1832ESS 18 Inch Dishwasher
BOSCH SPI2IKS10E Dishwasher
SIEMENS SR65YX11ME Dishwasher
FISHER PAYKEL DD24DAX9N Dishwasher
SHARP SDW6767HS Slide In Smart Dishwasher
AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher
SIEMENS SX53EW01AH Dishwasher
LG LDTS5552D PrintProof Black Dishwasher