HOBART CLCS66e ML Series Dishwasher
PROGRAMMING
PROGRAMMING SECURITY LEVELS
Your warewasher's microprocessor allows customization options for machine
operation for cleaning your ware, maintaining required tank temperatures and other
functions related to your kitchen operation. To activate or change these features,
the programming edit mode must be entered at an appropriate level.
It is recommended that the warewasher stay in the lowest security level to prevent
options from being modified from what is expected and / or acceptable. The security
level will automatically revert back to Operator when any of the following occur:
1) No keys on the keypad are pressed for 10 minutes or more.
2) The machine is placed in Standby by pressing the POWER key.
3) An invalid Security Code is entered on the 'Enter Security Code?' screen.
The names and descriptions of the security levels are listed from lowest to highest
levels.
NOTE: The letter to the right of the name is the same as the letter you will see at
the lower-left corner of the 'Enter Security Code?' screen: O or M. Refer to Entering
the Parameters Menu, page 33, for more details.
NOTE: The security level does not, by itself, affect the operation of the machine or
inhibit the use of the START, STOP or POWER keys. All of these basic functions
are always available in any security level.
Operator – O
The Operator level is the most basic security level. It is the one that is initiated
by default when the unit is powered up. No security code is required to enter the
Operator security level. From this level you may enter a Security Code to elevate
to a higher security level.
Manager – M
TheManagerlevelisthehighestlevelattainablebytheuser. ItrequirestheManager
Code to be entered to access the Manager level.
The Manager security level allows access to all of the options listed in either the
Parameters Menu — Table1 and / or the Communications Setup Menu — Table 2.
It is recommended that power to the machine be cycled off and on after any
Manager level options are modified and saved.
The Security Code for the Manager level can be changed by a kitchen manager
or anyone with the Manager Code. The default code is 1001. As such, it is
recommended that this code be changed from the default and that the new code
be stored in a safe place. If the Manager code is ever lost or forgotten, it can be
reset by Hobart Service.
NOTE: Having Hobart Service reset the Manager Code is not covered under either
the basic or the extended warranties.
– 32 –
| General | Details |
|---|---|
| Name | HOBART CLCS66e ML Series Dishwasher |
| Make | HOBART |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HOBART AM16 Commercial Dishwasher
HOBART S.48820 Commercial Dishwasher
SHARP QW-NA25GU44BS-DE Undercounter Dishwasher
BOSCH SMS46NI10M Dishwasher
FISHER PAYKEL DD24DDFTX9 N Dishwasher
FISHER and PAYKEL DD60SDFX9 Contemporary Dishwasher
Hisense HV662C60 Dishwasher
FURRION CCD-0009140 18 Inch Countertop Dishwasher
SIEMENS SX53EW01AH Dishwasher
FISHER PAYKEL DD24DTI9N Dishwasher
FISHER AND PAYKEL DD60STX6HI1-CN Tall Dishwasher
FISHER AND PAYKEL DD60DCHX9 Dishwasher