HOBART CLCS66e ML Series Dishwasher
5. Remove wash arms. Remove wash arm end caps
(Fig. 31) and push any nozzle obstructions into the
wash arms. Thoroughly flush the wash arms in a
sink. Replace the wash arm end caps.
WASH
ARM
6. Beforeremovingstrainerbasket(s)andpan(s),clean
off any debris from machine walls using a hose with
spray nozzle. Flush all debris toward the strainers.
END
CAPS
Fig. 31
7. Clean debris from back side of doors, in between the
doors and chamber, and around door seal of chamber. Avoid direct spray of
controls on top of unit.
8. Clean dish tables by flushing any debris into the dishwasher.
9. Removeallstrainerpan(s)andstrainerbasket(s). Emptycontentsintogarbage
can or disposer and thoroughly clean pan(s) and basket(s) in a sink. DO
NOT strike strainer pan(s) or strainer basket(s) on solid objects to dislodge
debris. Refer to Figs. 23 & 26 on page 20.
10. When tanks are empty, remove the standpipe and clean the pump intake
strainer(s) on the bottom of the standpipe or at the bottom of the tank
(Figs. 21 & 32).
11. Remove curtains. Thoroughly scrub, rinse
and allow curtains to dry at the end of each
day’s operation.
12. Thoroughly wash out the interior of the
machine with a hose fitted with a spray
PUMP
nozzle. Remove remaining soil with a cloth
INTAKE
or soft brush and mild cleanser. Flush out
again with hose spray. Do not allow food soil
STRAINER
IN BOTTOM
OF TANK
to accumulate on the bottom and/or sides
of the tank.
Fig. 32
13. Return all standpipe(s), strainer pan(s) and
strainer basket(s) to their proper locations
(Figs. 21, 24, 23 & 26) on page 20.
14. Insert the upper wash arm(s) straight onto the connector pipe. Rest the
extension on the guide. Rotate the arm upward to latch it.
15. Insert the lower wash arm(s) straight onto the connector pipe. Rest the
extension on the guide. Swing the front of the arm down until level to fully
position it.
16. Leave doors open and curtains removed while machine is not in use to allow
the interior to air out and dry. Install curtains after machine has dried out.
•
DO NOT attempt to clean Opti-Rinse final rinse nozzle(s). Opti-
Rinse nozzle(s) should be replaced if they become clogged or if the spray
pattern is ineffective.
• Never use steel wool to clean warewasher surfaces. Use only products
formulated to be safe on stainless steel.
– 29 –
| General | Details |
|---|---|
| Name | HOBART CLCS66e ML Series Dishwasher |
| Make | HOBART |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HOBART AM16 Commercial Dishwasher
HOBART S.48820 Commercial Dishwasher
FISHER PAYKEL DD24DCTX9 N Tall Dishwasher
Bosch SMV4HTX00G Fully Integrated Dishwasher
ASKO D5536XLFI Dishwasher
FISHER and PAYKEL DW24UT2I2 Series 7 Integrated Dishwasher
FISHER AND PAYKEL DD24DI9N Dishwasher
BOSCH SHV9PCM3N Benchmark Dishwasher
BOSCH SMU6ECS12E Dishwasher
Miele G 7719 Dishwasher
KitchenAid KDFE204KPS Dishwasher
Jackson DishStar LT Temperature Undercounter Dishwasher