HOBART CLCS66e ML Series Dishwasher
Optional Table Limit Switch
If a rack reaches the end of the unload table and trips the table limit switch, the
conveyor, pumps and final rinse shut off. The display alternates between the tank
names and 'Unload Dishes'. After the rack is removed and the table limit switch
resets, normal operation of the dishwasher resumes.
Auto-Timer
To conserve energy, if no rack enters the machine for a preset amount of time, the
Auto-Timer counts down and the pumps and conveyor shut off. Tanks continue to
heat, and tank temperatures display. To resume operation, insert a rack or press
the START / ENTER key on the keypad (Fig. 28).
NOTE: The Auto-Timer shut off setting is preset from the factory at 45 seconds.
You can adjust the setting from 30 to 180 seconds (15 second increments). Refer
to the Parameters Menu, page 34.
Energy Saver Mode
After a period of machine inactivity, the control initiates Energy Saver Mode (ESM):
All warewasher components are turned off, and the display on the control dims,
displaying 'Energy Saver Active / Press STOP to Exit'. To exit Energy Saver Mode,
press the STOP key (Fig. 28). You may press the POWER key to completely turn
the machine off. The period of machine inactivity prior to ESM can be set from 1 to
6 hours in the Parameters Menu; 2 hours is the factory setting. Refer to page 34.
Dirty Water Mode
Three settings are provided; refer to Parameters Menu on page 34.
Disabled – No alarm displays. This is the factory setting.
Alert Only – After a period of operation, 'Water Change Req'd' displays until the
water is changed; however, the control allows machine operation.
Alert & Lockout – After a period of operation,'Change Water Soon' displays for 5
minutes, alerting you to change the water; then, 'Water Change Req'd' displays and
further machine operation is prevented until tanks are drained and refilled.
CLEANING
The machine must be thoroughly cleaned at the end of each working shift, or at
least twice a day. Use only products formulated to be safe on stainless steel. Use
a damp cloth and mild soapy water.
1. Press the POWER key on the keypad to turn the machine Off (Fig. 28).
Disconnect the electrical power to the machine and follow
lockout / tagout procedures before you begin cleaning. There may be
multiple circuits. Be sure all circuits are disconnected.
2. Open the doors. Standard door interlock switches
preventmachineoperation withinspection doors open.
DRAIN
3. Visually inspect the upper and lower final rinse nozzles
LEVER
to make sure they are free of debris.
4. Open drain(s) by pulling drain lever(s) up (Fig. 30).
Fig. 30
– 28 –
| General | Details |
|---|---|
| Name | HOBART CLCS66e ML Series Dishwasher |
| Make | HOBART |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HOBART AM16 Commercial Dishwasher
HOBART S.48820 Commercial Dishwasher
BOSCH SMS4EMW01E-30 Dishwasher
AMANA ADB1300AFS Full Console Dishwasher
FISHER AND PAYKEL DD60DTX6HI1 Tall Dishwasher
BOSCH SMI4ECS22E Dishwasher
Miele PFD 101 Free Standing Dishwasher
BOSCH SMH8ZB802E Dishwasher
SIEMENS SN63EX03AE Dishwasher
ASKO DFI5558MKXXL Dishwasher
IKEA LAGAN Integrated Dishwasher
FISHER PAYKEL DD24DTX6I1 Integrated Double Dishwasher