HOBART CLCS66e ML Series Dishwasher
PARAMETERS MENU — TABLE 1
Parameter
Name
Description
Possible
Values
Default
Value
Sanitizing Mode
Sets the operating temperatures that regulate the tank heaters and High Temp.
High
the internal booster (if provided): high temperature sanitizing mode,
or low temperature, chemical sanitizing mode.
or
Temp.
Low Temp.
30 to 180
(in 15 second
increments)
Auto-Timer
Pumps and conveyor shut down after this period of inactivity to save
energy. Refer to page 27.
45
Low FR Temp.
Alert
Enables or disables a visual alert on the display that indicates that
Final Rinse water temperature is below the required minimum of
180°F (82°C). When enabled, a message will display notifying the
user of this condition. However, machine operation will not change
and ware will continue to run through the machine as expected.
After the temperature increases past the minimum, the message
stops. When disabled, there will be no extra message indicating
a low-temperture event; however, the temperature display will still
show the current Final Rinse water temperature. Refer to page 24.
Disabled
or
Enabled
Disabled
Tank Temp. Alert
Delime Interval
Displays a message that the water temperature of a certain tank is
below the minimum required. After the temperature increases past
the minimum, the message stops. Refer to page 24.
Disabled
or
Enabled
Disabled
0
Sets the delime interval from 0 to 1000 hours. Asetting of 0 disables
this feature. Up arrow increases 10 hours, Down arrow decreases.
Hold Up or Down arrow for faster movement.
0
to
1000
Dirty Water Mode Disabled: Ignores dirty water. Alert Only: Displays 'Water Change
Disabled,
Disabled
Req'd' after a period of operation but does not require refilling. Alert Alert Only
&Lockout:Displays'ChangeWaterSoon'for5minutesafteraperiod
ofoperation;then'WaterChangeReq'd'displaysandmachinecannot
run until tank(s) are drained and refilled. Refer to page 26.
or
Alert &
Lockout
Dirty Water
Interval
Sets the period (in hours) of rinsing before an alert is shown. This
option is only available when Dirty Water Mode is set to 'Alert Only'
or to 'Alert & Lockout'.
1 – 6
4
Energy Saver
Mode (ESM)
ESM begins after a period of machine inactivity. Up arrow increases 1, 2, 3, 4,
2
by 1 hour. Down arrow decreases by 1 hour. Refer to page 26.
5, 6
Change Mgr.
Code
SetsanewSecurityCodeforaccesstotheManagerLevelparameters.
It is recommended to change this code from the default value and
store the new code where all kitchen managers, but no operators,
can access it.
0000
to
8888
1001
Edit
PressSTART/ENTERtoaccesstheCommunicationsSetupMenu,to
editsettingsfortheNAFEMDataProtocol. RefertoCommunications
Setup Menu – Table 2, page 35. Press Down arrow or Up arrow to
move down or up the menu.
Communications
Setup?
Save Settings
and Exit?
Press START / ENTER to save the changed settings, exit the
Parameters Menu and return to the main screen. Any settings
that were changed are saved and most become active
immediately. If one or more settings are not activated immediately,
a message will display indicating that you need to cycle power off
and on to make them active.
Cancel Settings
and Exit?
Press START / ENTER to exit the Parameters Menu and return to
the main screen. Any settings that were changed are cancelled and
revert back to the previously saved values.
– 35 –
| General | Details |
|---|---|
| Name | HOBART CLCS66e ML Series Dishwasher |
| Make | HOBART |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HOBART AM16 Commercial Dishwasher
HOBART S.48820 Commercial Dishwasher
SIEMENS SX93E805CE Dishwasher
FISHER and PAYKEL DW60UNT4B2 Contemporary Tall Built Under Dishwasher
FISHER PAYKEL DD24STX6I1 Sanitize Dishwasher
AMANA ADB1400AMS Undercounter Dishwasher
LG DFB424 Dishwasher
FISHER and PAYKEL DD60SCTX9 DishDrawe Dishwasher
FISHER AND PAYKEL DW24UT4I2 Tall Dishwasher
BOSCH SMS6ECI15E Dishwasher
FISHER PAYKEL DD24DCTW9N Dishwasher
BOSCH SHX65CM5N Dishwasher